Surface-Mount Single Layer Capacitor
 
Applications
Surface-Mount SLC’s are used in Microwave Integrated Circuits (MIC) applications, including:
  • DC Block (in series with an MIC transmission line)
  • RF Bypass (in shunt with transmission lines)
    • Features
  • Consistent performance
  • Coplanar waveguide
  • Ideal for in-line epoxy attach applications
    		•  RESISTOR

    Part Number Identification

    PNI
    Note:
  • 2.5 Microns Min. Au.
  • If a customer requests that the size of the SLC be in accordance with the EIA MLCC specification, the first 2 digits of the size code would be replaced by (EIA code), for example: TG(0603)11E5R0BNTW.
    		•
    Type & Size Codes
    CHART
    Size Codes (T) Inch (mm)
    T Code T (Thickness)
    1
    		 0.005 ± 0.002 (0.127 ± 0.051)
    2
    		 0.007 ± 0.002 (0.178 ± 0.051)
    3
    		 0.010 ± 0.002 (0.254 ± 0.051)
    4
    		 0.015 ± 0.004 (0.381 ± 0.102)
    5
    		 Other requests
    Size Codes (L/W)
    L/W Code 15 20 25 30 35 40 50
    Length-Max 0.040(1.016)
    		0.050 (1.270) 0.080 (2.032) 0.080 (2.032) 0.080 (2.032) 0.080 (2.032) 0.080 (2.032)
    Width 0.015 ± 0.005 (0.381± .127) 0.020 ± 0.005 (0.508 ± 0.127) 0.025 ± 0.005 (0.635 ± 0.127) 0.030 ± 0.005(0.762 ± 0.127) 0.035 ± 0.005(0.889 ± 0.127) 0.040 ± 0.005(1.016 ± 0.127) 0.050 ± 0.050(1.27 ± 0.127)
    Gap 0.008(0.203) 0.008(0.203) 0.020(0.508) 0.020(0.508) 0.020(0.508) 0.020(0.508) 0.020(0.508)
    Capacitance
    CAPACITANCE