General Single Layer Capacitors (SLC)
 
General Single Layer Capacitors
Applications
SLC’s are used in Microwave Integrated Circuits (MIC) for applications including:
  • DC Block (in series with an MIC transmission line)
  • RF Bypass (in shunt with transmission lines)
  • Source Bypass (in shunt with an active device)
  • Impedance Matching
    • Features
  • Small size with high capacitance
  • Excellent electrical performance
  • Excellent solderability
    		•  RESISTOR

    Part Number Identification

    PNI
    Note:
  • 2.5 Microns Min. Au.
  • If a customer requests that the size of the SLC be in accordance with the EIA MLCC specification, the first 2 digits of the size code would be replaced by (EIA code), for example: TG(0603)11E5R0BNTW.
    		•
    Type & Size Codes
    CHART
    Size Codes (T) Inch (mm)
    T Code T (Thickness)
    1
    		 0.005 ± 0.002 (0.127 ± 0.051)
    2
    		 0.007 ± 0.002 (0.178 ± 0.051)
    3
    		 0.010 ± 0.002 (0.254 ± 0.051)
    4
    		 0.015 ± 0.004 (0.381 ± 0.102)
    5
    		 Other requests
    Size Codes (L/W)
    L/W Code 10 15 20 25 35 50 70 90
    Length 0.010 ± 0.003 (0.254± .076) 0.015 ± 0.005 (0.381± .127)
    		 0.020 ± 0.005 (0.508 ± 0.127) 0.025 ± 0.005 (0.635 ± 0.127) 0.035 ± 0.005 (0.889± .127) 0.050±.010 (1.27± .254) 0.070 ± 0.010 (1.78 ± 0.254) 0.090 ± 0.010 (2.29 ± 0.254)
    Width 0.010 ± 0.003 (0.254± .076) 0.015 ± 0.005 (0.381± .127) 0.020 ± 0.005 (0.508 ± 0.127) 0.025 ± 0.005 (0.635 ± 0.127) 0.035 ± 0.005 (0.889± .127) 0.050±.010 (1.27± .254) 0.070 ± 0.010 (1.78 ± 0.254) 0.090 ± 0.010 (2.29 ± 0.254)
    Border
    0.002 ± 0.001 (0.051 ± 0.025)

    Capacitance
    N-Type typical SLC Capacitance
    S-Type typical SLC Capacitance
    Frequency Curves
    S21 Insert Loss curves
    GRAPH1 GRAPH2
    GRAPH1